











This is a railing system the customer needed us to install for easy access in and out of their pool. We extended it out to the second step of the wedding cake for safety. Watertown cut extra concrete out to tie in with rebar and existing concrete. Once again we design a cage system connecting the bronze anchors so when new concrete is poured, the anchors will not move or loosen over time.
























































































This pool was remodelled to allow the customer to have much easier access in and out of their pool. Watertown installed a 6′ French curve fibre-glass stair along with a railing that extended into the pool a little more than usual.
We also installed a double aluminum track coping system so the liner had a good secure track and the customer could now have a lock in cover system for the winter. Once the liner was installed the pool looked better then new. We worked with an existing interlocking patio at the sides of the new stair.
The customer were very impressed with our quality of work.






































On this project our customer wanted to upgrade his plastic walk-in stair they had. The 6′ stair was cracked and damaged beyond repairing. Watertown removed and cut the access hole to accommodate an 8′ coloured fibre glass stair that we installed. Notice the PVC supports and concrete we added.
No other company pours this amount of concrete for a stair installation. When entering and exiting the pool you have that solid feel under your feet of walking on concrete. There are no voids under or around the step for any weak areas for cracks or splits to occur in the future.




































































Watertown remodelled this pool twice also. The first time we installed a 6′ straight walk in step, double aluminum track system and a new liner.
The second remodelling involved a sport pool conversion with a new liner. Our main focus on designing this bottom was to give the customer as much surface floor area as possible in the deep end of the pool. We could not simply bring the depth up. The old vermiculite bottom had to be removed and we had to change the angle of the floor to give the customer the most surface area.
Watertown installed a drain pipe 12″ below floor height with a submersible pump to keep the ground water down as we worked. We had a lot of rain to contend with during this job and the customers were extremely patient and very helpful with the complete job. It’s a pleasure doing work for these customers.


























































































Watertown first remodelled this pool about 24 years ago. We installed a new designed step we came up with before they had spa steps and spill over spas for pools. Four jets were plumbed and two suctions also, so it could operate separately from the pool. Watertown designed a track and a piece of Plexiglas barrier that the customer could slide in and out. This allowed them to heat the step area to a spa temperature. A new liner was also installed. These specific customers have been extremely loyal to us from the beginning of our business and we greatly appreciate their patronage every season.
Flash ahead to a few years ago, another liner was needed. At this time the customer wanted to bring their pool up to date. Watertown brought the depth level up to a specific height the customers wanted. The track system we installed 24 years ago for a lock in cover was removed and coping was re-gel coated. A double aluminum track was installed along with two main drains, new bottom, and finally the new sport liner. This cut their heating and chemical usage cost down considerably. Now the customer can enjoy their pool for quite some time to come.



































































































